Pre-Order

Pre-Sale Zesty Kryo

Orientation
Water cooling kit

  • This is a pre-sale. This means 3 things:

    • We expect to ship in 2 to 3 months
    • The price will go up, after pre-sale ends
    • If you order anything else at the same time, it will be shipped at the time your Kryo ships.

    The Zesty Kryo is a water cooled heatsink replacement for the standard E3D V6 heatsink, it has the following benefits compared to the standard v6 heatsink:

    • 13mm shorter
    • Vastly better cooling capacity
    • Weight reduction of about 25%
    • More flexibility in mounting the hot end
    • You can turn your printer off immediately after printing

    It comes with hoses and hose clips to attach to a water cooling system. If you do not have a water cooling system, you can also purchase our separate cooling kit.

    The Kryo comes with inserts that allow you to mount it in 3 different ways:

    • Groove mount
    • M12x1.5 nut as per Smart Delta Effector
    • Using the side mounts

    All inserts are included as standard.

    The side mount holes can be used to mount the Kryo unit, but can also be used to mount part cooling fans, or an air pump hose, if you use a Berd-Air type of part cooling. There are an expanding list of available fan shrouds and other holders on Thingiverse. You need M3 screws to mount anything to the side mounts. The holes are not tapped, but the SLS nylon will allow you to screw the M3 in with no problem.

     

     

Subscribe