The Sidewinder V1.1

Cable Length
Filament

This is version 1.1 

The Nimble Sidewinder is a unique Nimble. It was custom developed for a customer. The result was interesting enough, that we decided to go ahead and turn it into a product.

The Nimble Sidewinder is a Remote Direct Drive extruder. This means the stepper is split away from the extruder itself. This removes almost all of the weight from the extruder part, making the Nimble weigh less than 30 grams. The Nimble Sidewinder is powered via a drive cable that transmits the power of the stepper directly to the gear system inside the Sidewinder. The drive cable comes out horizontally. It is designed to be installed in CoreXY or Cartesian printers, especially when used inside an enclosure. It is less effective on a Delta type printer.
It is a little heavier than the Nimble (29.8 grams) but let's be honest, there is nothing as light as the Nimble.

It is a small and light extruder. Measuring only 32.8x30x31 mm, it is a very impressive extruder. The standard drive cable is 95 cm long and this is more than long enough for most printers. Other lengths are available. 

(The AAA battery is not included or required. Only shown for scale.)

The Sidewinder can be mounted using an adapter system. This makes it easy to install and easy to switch to another printer. For details, check out the adapter page.

The biggest difference between V1 and V1.1: It is mirrored. Also, there are a few tweaks in the shape, for instance, a little collar to clamp a reverse bowden tube in. 

The custom hob and the breech lever system allows any filament to be printed. From super hard carbon filled filament to X60, the floppiest filament in existence.

The Creality CR-10Pro currently does not support the Sidewinder. The driver used for the extruder stepper cannot handle the speeds needed for the Sidewinder. We are developing a solution.

Overall facts and figures.

  • WxDxH is 32.8x30x31 mm for the unit itself and 42 mm wide with the sleeve clamp.
  • Weight is less than 28 grams.
  • Drive cable is 95 cm long. There are different lengths available if you want a different length.
  • Only tools needed: a 2.5 mm and a 1.5 mm Allen key or hex key. If you need to use the M3 nuts you also need a 5.5 mm wrench or spanner.
  • It will fit any Nema17 stepper, the suggested torque rating is: 4kg/cm. We used: Wantai Nema17 Stepper Motor 42BYGHW609P1
  • Filament size: 1.75 mm is standard.
  • Any standard hot-end can be used. If it is a Bowden hot-end, remove the bowden connector, it is not needed.
  • The SLS printed parts of the Nimble may exhibit mild variations in colour.

 

What is in the box? 

  • 1 Nimble Sidewinder, including the breech
  • 1 Drive cable plus sleeve
  • 1 Coupler for the stepper
  • 1 Bracket for the stepper
  • 2 Clamps for the sleeve
  • All the nuts and bolts needed to mount and use the Sidewinder on your printer.

Customer Reviews

Based on 1 review Write a review
The Nimble V1.2 Sold Out
Quick View
Dual Nimble kit Sold Out
Quick View
The Nimble V2 from €77.50
Quick View

Breech V2 €8.75
Quick View
The Sidewinder V2 from €86.50
Quick View

Subscribe